RustDesk Client Setup
<— Return to: https://learn.above.im/s/12aef602-75ec-4367-b619-07ad051e2a6f/doc/older-above-phones-fG3zUVbYnS
RustDesk is an open-source app that allows for remote screen sharing (and even remote input control). It can be very useful during support calls and figuring out individual issues. We run our own server for RustDesk for additional security and privacy.
Following is a guide on how to set up your device to use our RustDesk server.
Phone
Install RustDesk from F-Droid (or from their official Github page)
Copy the following text OR scan the QR Code with your Camera app, (which will allow you to directly copy the same text).
9JSPvRGaSx0V0k3a5V1diNjeTdmVXNGUWF2SqJESFhnbVdWVw5WcLtydolENlJiOikXZrJCLiIiOikGchJCLiIiOikXYsVmciwiItlmLlZ3biFmLlR3btVmciojI0N3boJye
Use the Camera app > QR scan at the bottom left to scan this code
While your Camera is in QR Scan mode, just hold the back camera in front of the QR code shown above.
It will show a Scan result rectangle with the text in decrypted form.
On the top right you will also see buttons to directly copy or share the shown text
Tap on the copy button (icon of two pages on top of each other).
When something is copied into the clipboard, you will see a indicator pop up from the bottom left.
Open the app RustDesk from your list of apps.
Swipe up from home screen to open the app drawer
Tap on Settings at the bottom right
Inside the Settings menu, tap on ID / Relay Server
Paste in the copied text by hitting the 📋 clipboard icon acting as the Paste button
You should see a confirmation 'Import configuration server successfully’
Tap on OK to finish.
You are now set up with our own RustDesk server, ready to get direct help with RustDesk from our support team!
Manually adding server & key:
In case Step 0. was not done successfully, you can also paste in the needed info manually.
Into the ID server field, type or copy/paste in the following:
remote.above.im
Into the Key field, copy / paste in the following:
e4Ihw+KqnpUgUnxEHBjKaVPcWVgSz3bwUyky4WLRhdo=
Hold down momentarily for the 'Paste' button to show
Tap on OK to finish.
You are now set up with our own RustDesk server, ready to get direct help with RustDesk from our support team!
Desktop / Laptop
First, open RustDesk.
Then click on the ☰ 3 lines icon at the upper right of the window.
Click the network tab, then ID/Relay server. Enter the following in the named fields:
ID Server:
remote.above.imKey:
e4Ihw+KqnpUgUnxEHBjKaVPcWVgSz3bwUyky4WLRhdo=